Meeting One Pager

Blue Ribbon® OSB Roof Sheathing

The Blue Ribbon® OSB sheathing panels are crafted without any core voids, knots, or splits, ensuring a high-quality foundation for both wall and roof sheathing purposes. Suitable for residential and light commercial construction projects, these panels offer the necessary strength, impact resistance, and consistency to maintain seamless progress on your jobs.

Qualities

Span and exposure rated sheathing with dimensional stability,No core voids, knots or splits, Quality base layer for roof sheathing applications, Blue edge seal helps prevent moisture intrusion

01 / TECHNICAL SPECIFICATIONS

Length/Width Tolerance

± 1/16” (± 1.6 mm)

Straightness Tolerance

± 1/16” (± 1.6 mm)

Squareness Tolerance

± 1/8” (± 3.2 mm)

Fire Classification

Class III or C

Flame Spread Rating

76-200, smoke developed index <450

Building Code Compliance

PS 2-10

Classification

Exposure 1 : OSB suitable for uses not permanently exposed to the weather. Panels classified as Exposure 1 are intended to resist the effects of moisture on structural performance as may occur due to construction delays, or other conditions of similar severity.

02 / AVAILABLE SIZES

(MILLS 451, 475, 500, 530)

Square Edge

3′-11 7⁄8″ (1.216 m) x 7′-11 7⁄8″ (2.435 m) – sized for 4′ x 8′

Tounge & Groove

3′-11 1⁄2″ (1.206 m) x 7′-11 7⁄8″ (2.435 m) – sized for 4′ x 8′

(MILLS 531, 532)

Square Edge

3′-11 13⁄16″ (1.162 m) x 7′-11 7⁄8″ (2.435 m) – sized for 4′ x 8′
‍3′-11 13⁄16″ (1.162 m) x 8′-11 7⁄8″ (2.740 m) – sized for 4′ x 9′
3′-11 13⁄16″ (1.162 m) x 9′-11 7⁄8″ (3.044 m) – sized for 4′ x 10′

Tounge & Groove

3′-11 1⁄2″ (1.206 m) x 7′-11 7⁄8″ (2.435 m) – sized for 4′ x 8′
‍3′-11 1⁄2″ (1.206 m) x 8′-11 7⁄8″ (2.740 m) – sized for 4′ x 9′
‍3′-11 1⁄2″ (1.206 m) x 9′-11 7⁄8″ (3.044 m) – sized for 4′ x 10′

03 / BUILDING CODE PERFORMANCE CATEGORIES, PANEL THICKNESS

7/16 CAT

0.418″ (10.61 mm)

15/32 CAT

0.451″ (11.45 mm)

1/2 CAT

0.483″ (12.26mm)

19/32 CAT

0.578″ (14.68 mm)

23/32 CAT

0.703″ (17.85 mm)

7/8 CAT

0.849″ (21.56 mm)

1-1/8 CAT

1.091″ (27.71 mm)

DryGuard® Enhanced OSB Roof Sheathing

The DryGuard® Enhanced OSB roof sheathing panel is classified as Structural I sheathing, providing enhanced resistance against moisture from various weather elements across the entire panel. Shielding your roof during the construction phase with these upgraded OSB panels can yield significant time and cost savings when they're most needed.

Qualities

Improved moisture resistance over standard OSB, helping protect against water-related issues such as thickness and edge swell, Enhanced nail-holding ability, stiffness and strength, Black edge seal helps prevent moisture intrusion, Helps avoid costly and time-consuming call backs.

01 / TECHNICAL SPECIFICATIONS

Length/Width Tolerance

± 1/16” (± 1.6 mm)

Straightness Tolerance

± 1/16” (± 1.6 mm)

Squareness Tolerance

± 1/8” (± 3.2 mm)

Testing Agency

APA® – The Engineered Wood Association

Flame Spread Rating

76-200, smoke developed index <450

Building Code Compliance

PS 2-10

Classification

Exposure 1: OSB suitable for uses not permanently exposed to the weather. Panels classified as Exposure 1 are intended to resist the effects of moisture on structural performance as may occur due to construction delays, or other conditions of similar severity.

02 / AVAILABLE SIZES

Square Edge

3′-11 7⁄8″ (1.216 m) x 7′-11 7⁄8″ (2.435 m) – sized for 4′ x 8′

Tounge & Groove

3′-11 1⁄2″ (1.206 m) x 7′-11 7⁄8″ (2.435 m) – sized for 4′ x 8′

03 / BUILDING CODE PERFORMANCE CATEGORIES, PANEL THICKNESS

1/2 CAT

0.483″ (12.26mm)

19/32 CAT

0.578″ (14.68 mm)

23/32 CAT

0.703″ (17.85 mm)

Thermostat Radiant Barrier

Thermostat® radiant barrier panels effectively deflect up to 97% of the sun’s radiant heat away from the attic of a house, potentially reducing attic temperatures by as much as 30°F. This enhanced energy efficiency renders Thermostat radiant barrier panels an excellent selection for new constructions, extensions, and remodels in regions with warm to hot climates.

Qualities

Increases indoor comfort while helping reduce cooling energy costs, Reflects up to 97% of the sun’s radiant heat, Can help save up to 17% on cooling energy consumption during peak summer months.

01 / TECHNICAL SPECIFICATIONS

Thickness Tolerance

± 1/32” (± 0.79 mm)

Length/Width Tolerance

+0, –1/8” (+0, –3.2 mm)

Straightness Tolerance

± 1/16” (± 1.6 mm)

Squareness Tolerance

± 1/8” (± 3.2 mm)

Testing Agency

APA – The Engineered Wood Association

Flame Spread Rating

75-200, smoke developed index <450

Building Code Compliance

PS 2-04

Classification

Exposure 1: OSB suitable for uses not permanently exposed to the weather. Panels classified as Exposure 1 are intended to resist the effects of moisture on structural performance as may occur due to construction delays, or other conditions of similar severity.

Code Fire Classification

Class III or C

Emissivity

.03

02 / AVAILABLE SIZES

Square Edge

3’-11 7/8” (1.216 m) x 7’-11 7/8” (2.435 m) – sized for 4’ x 8’

Square Edge

3’-11 7/8” (1.216 m) x 8’-11 7/8” (2.740 m) – sized for 4’ x 9’

Square Edge

3’-11 7/8” (1.216 m) x 9’-11 7/8” (3.044 m) – sized for 4’ x 10’

03 / BUILDING CODE PERFORMANCE CATEGORIES, PANEL THICKNESS

7/16 CAT

0.418″ (10.61 mm)

15/32 CAT

0.451″ (11.45 mm)

19/32 CAT

0.578″ (14.68 mm)

Plytanium® Plywood Roof Sheathing

Plytanium® plywood sheathing delivers exceptional performance, durability, and impact resistance for walls and roofs. Its robust construction, characterised by stiffness and strength, is well-suited for both residential and light commercial construction projects. When it comes to enduring roof sheathing, Plytanium plywood from Georgia-Pacific sets the standard for longevity and reliability.

Qualities

Ideal for residential and light commercial construction, Quality construction, durability and impact resistance, Stiff and strong, Manufactured for reduced edge swell and less telegraphing

01 / TECHNICAL SPECIFICATIONS

Length/Width Tolerance

± 1/16” (± 1.6 mm)

Straightness Tolerance

± 1/16” (± 1.6 mm)

Squareness Tolerance

± 1/8” (± 3.2 mm)

Fire Classification

Class III or C

Flame Spread Rating

76-200, smoke developed index <450

Building Code Compliance

PS 2-10

Classification

02 / AVAILABLE SIZES

Square Edge

3’-11 7⁄8” (1.216 m) x 7’-11 7⁄8” (2.435 m)

03 / BUILDING CODE PERFORMANCE CATEGORIES, PANEL THICKNESS

3/8 CAT

0.354” (8.99 mm)

15/32 CAT

0.451″ (11.45 mm)

15/32 CAT

0.451″ (11.45 mm)

19/32 CAT

0.578″ (14.68 mm)

23/32 CAT

0.703″ (17.85 mm)

ROOF SHEATHING PRODUCTS

Blue Ribbon® OSB Roof Sheathing

DryGuard® Enhanced OSB Roof Sheathing

Thermostat Radiant Barrier

Plytanium® Plywood Roof Sheathing